Connecting to MicroAssistant
Connect your phone to the MicroAssistant access point. The default password is “12345678”.
Choosing MicroAssistant mode
Once connected to the device’s access point, open a web browser and enter “192.168.4.1” in the address bar. Select the desired operating mode for the device: STA Mode to connect the device to your local wireless network, or AP Mode to have the device create its own wireless network.
Connecting to local network
If you configure the device in STA Mode, it will perform a scan of nearby Wi-Fi networks. Select your preferred network from the list.
Entering credentials
Enter your Wi-Fi credentials in the popup dialog and click Connect.
Rebooting device after success
Upon successful connection, a new popup will appear displaying the device’s IP address. Make a note of this IP address as it will be required later. Click the OK button, then reboot the device either by selecting the Reboot option or manually restarting it. You can access the application interface by entering the saved IP address into a browser on your network.